Our RFID security seals combine a galvanized steel cable, long-range UHF identity and electronic condition detection in an IP66 ABS housing. They are suited to organizations that need one controlled security-seal policy across vehicles, containers, storage units and restricted assets.
RFID Security Seal Specifications
The 381 mm housing platform should be reviewed against the protected access point, reader infrastructure and security procedure rather than selected by reading distance alone.
| Specification | Listed Configuration | Security Program Requirement |
|---|---|---|
| Seal dimensions | 381 × 50 × 19 mm | Confirm clearance and mounting position. |
| Chip | CAB1/VBL7-NC | Verify reader and software compatibility. |
| Protocol | ISO 18000-6C Gen2 V2 | Define identity and condition commands. |
| TID/UID | 112 bits | Capture during controlled commissioning. |
| EPC memory | 192 bits | Create a unique seal-number structure. |
| User memory | 512-bit User File_0 | Approve data fields and update rights. |
| Reserved memory | 112 bits | Control credentials and access. |
| Operating frequency | 865–868 MHz | Confirm the deployment region. |
| Reference read range | Up to 10 m, reader dependent | Test each approved checkpoint. |
| Construction | ABS housing and galvanized steel cable | Validate the cable and protected access point. |
| Installation | Hanging style | Document the approved installation method. |
| Protection | IP66 and on-metal capability | Validate the applied environment. |
| Detection | Detection sensor | Define each result and response. |
| Color | Yellow, red, green or customized | Assign colors to controlled meanings. |
Select Security Controls by Risk Level
Routine Controlled Access
Use serialized identity and defined physical inspection for standard warehouse, vehicle or equipment closures.
Multi-Party Custody
Add checkpoint RFID verification where responsibility passes between facilities, carriers or operating teams.
Elevated Security Risk
Require dual verification, controlled exception approval and retained evidence before release or opening.
Create a Corporate Seal-Control Policy
| Policy Area | Required Rule | Evidence to Retain | Control Owner |
|---|---|---|---|
| Seal receipt | Verify delivered identities against the order file | Batch, quantity, EPC and visible serial | Central administrator |
| Seal storage | Restrict unused seals to authorized personnel | Location, stock count and access record | Site security manager |
| Seal issuance | Assign one seal to one approved transaction | Asset, shipment, employee and time | Issuing supervisor |
| Checkpoint verification | Compare identity and available condition data | Reader, location, result and decision | Checkpoint operator |
| Exception review | Prevent release until the discrepancy is resolved | Inspection, decision and authorization | Security reviewer |
| Final closure | Record opening or removal under authority | Final state, party, time and disposition | Receiving authority |
Use Seal Colors as an Operational Aid
Color can help operators select the correct seal group, but the RFID identity and system record should remain the authoritative controls.
Site or Business Unit
Allocate colors to warehouses, regions or departments while preserving unique electronic identities.
Risk or Workflow Class
Differentiate standard, restricted or special-handling workflows under a documented internal policy.
Order or Customer Group
Use approved colors with printed serials, barcodes or logos for controlled project separation.
Define the Response to Security Exceptions
| Exception | Immediate Control | Review Evidence | Release Decision |
|---|---|---|---|
| Unknown RFID identity | Hold the protected unit | Seal source, visible code and assignment | Only after identity is resolved |
| Wrong assigned asset | Prevent automatic approval | EPC, asset and active transaction | Correct or escalate the assignment |
| Unexpected seal result | Conduct controlled inspection | Physical condition and reader data | Apply the security escalation rule |
| Unreadable seal | Repeat a close-range verified scan | Reader check, placement and damage | Do not infer a valid condition |
| Authorized seal change | Close the original record | Reason, officer, old and new identity | Continue under the replacement record |
Verify the Security Seal in Four Stages
Inspect
Check the housing, cable, printed identity and protected access point.
Interrogate
Read the EPC and supported condition data with the approved equipment.
Compare
Match the result with the asset, shipment and expected workflow stage.
Decide
Release, hold, inspect or escalate under the documented security policy.
Printing, Encoding and Record Preparation
Visible Security Data
- Human-readable serial number
- Barcode or QR code
- Company logo and text
- Approved housing color
Electronic Configuration
- EPC numbering structure
- User-memory data fields
- Credential requirements
- Encoding verification rules
Master Record
- EPC, TID and printed-code mapping
- Color and batch relationship
- Destination site allocation
- Required output-file format
Information Needed for Security Review
Protected Access Point
- Asset, container or vehicle type
- Closure and cable-routing photographs
- Required cable dimensions
- Operating and storage conditions
- Risk level and inspection procedure
RFID Security System
- Deployment country and frequency
- Reader, antenna and software models
- Required seal results and responses
- EPC, printing and color rules
- Quantity and destination country
Related RFID Security Seal Options
Compare housing size, read range, sensing, cable construction and application requirements before selecting another RFID security seal.
RFID Security Seals Questions
Does an RFID security seal prevent every intrusion? +
No seal should be treated as an absolute barrier. The product contributes physical closure, electronic identity and supported condition data within a broader inspection, access-control and exception-response procedure.
Why is the listed reading distance stated as 10 metres? +
The page's specification table lists 1000 cm. Actual performance must be measured with the intended reader, antenna, permitted power, installation, orientation and surrounding materials.
Can color alone identify a security level? +
Color can guide operators, but it can be copied or selected incorrectly. The RFID identity, visible serial number, assigned record and inspection result should remain the authoritative controls.
Does the seal continuously track an asset's location? +
The listed specification does not establish GPS or cellular tracking. Location events come from compatible RFID readers installed or operated at known checkpoints.
Can the seal be mounted directly near metal? +
The page lists on-metal capability, but the final attachment position, housing orientation, clearance and reading zone must still be validated on the actual asset or vehicle.
How should an unreadable seal be handled? +
Repeat the read with approved equipment at a controlled distance, inspect the housing and cable, compare the visible identity and route unresolved cases through the documented exception procedure.
What details are required for configuration review? +
Please provide the protected asset, closure photographs, cable requirement, operating region, risk level, reader models, required conditions, color rules, artwork, encoding data and quantity.
Build the RFID Seal Around Your Security Policy
Send us the protected asset, closure, cable requirement, risk level, operating region, reader setup, condition workflow, color rules, artwork, encoding data and quantity for review and pricing.
Request a Security Seal ReviewHot Tags: RFID security seals, China RFID security seals manufacturers, suppliers, factory, RFID Container Seal, rfid seal for document, rfid seal for oscillators, rfid seal for plumbing materials, rfid seal for steel, rfid seal for textile
