26 mm Anti-Tamper NFC Label for Close-Range Identity Checks
Our anti-tamper NFC label combines an FM11RF08 chip, ISO 14443A communication and a 22 mm aluminum antenna in a compact 26 mm round format. The printable brittle-paper face is intended to tear during attempted removal, helping prevent intact transfer to another package or device.
The published free-air read range is up to 3 cm, making this model suitable for deliberate near-field interaction rather than distant inventory reading. Reader, smartphone, data-format and mounting compatibility should be confirmed before production.
Anti-Tamper NFC Label Specifications
| Specification | Published Configuration | Procurement Check |
|---|---|---|
| Finished dimensions | 26 mm diameter | Confirm sufficient flat space around the full circular label. |
| Antenna dimensions | 22 mm diameter aluminum antenna | Keep the antenna clear of metal, folds and package edges. |
| Chip | FM11RF08 | Confirm compatibility with the final reader or phone. |
| Protocol | ISO 14443A | Define the required command, record and application behaviour. |
| Published identifier | 7-byte TID/UID | Decide how the UID links to the authorized item record. |
| Published block structure | 16 blocks, described as 4 × 16 bytes | Confirm the exact accessible memory layout before encoding. |
| Published storage | 1K user-storage configuration | Confirm usable capacity, access conditions and field allocation. |
| Operating frequency | 13.0–14.5 MHz | Verify the intended 13.56 MHz NFC/HF equipment. |
| Face material | Printable brittle paper | Confirm printing and environmental durability requirements. |
| Free-air reading range | Up to 3 cm, reader dependent | Retest after installation on the final product. |
| Installation | Adhesive | Test bonding and damage on the real surface. |
| Characteristic | Tamper-proof | Approve the required removal evidence through samples. |
Best Fit for Small Security-Seal Positions
Package Closure Points
The round label can bridge a box flap, cap area or compact closure where removal should damage the brittle paper and the embedded NFC structure. Do not fold the antenna sharply across an edge without sample testing.
Device Identity Binding
The 7-byte UID can be associated with a device or component record. The application must check the captured identifier against an authorized database rather than treating the UID alone as proof of authenticity.
Controlled Near-Field Reading
The short read zone requires the user to approach the label intentionally. This can reduce accidental reads compared with longer-range RFID systems, but it does not create access security by itself.
Confirm the Required Mobile or Reader Interaction
| Required Interaction | Data Requirement | Compatibility Check |
|---|---|---|
| Read a unique identifier | 7-byte UID linked to an item record | Confirm the reader application can access and process the UID. |
| Read written project data | Defined memory blocks and field structure | Test block access and data format on every required device. |
| Open a web page | Compatible record and sufficient usable memory | Confirm whether the chip, encoding and phone support the workflow. |
| Update label data | Writable fields and approved permissions | Test authentication, writing and readback with the final software. |
| Authenticate a product | Identifier, authorized database and status rules | Test valid, duplicated, removed and retired-item responses. |
Validate the Brittle-Paper Removal Response
Physical Evidence
The brittle-paper face is intended to tear instead of peeling away intact. Test the actual adhesive bond because plastic, coated cartons, painted housings and glass create different removal patterns.
- Inspect initial edge lifting.
- Record paper and adhesive separation.
- Check whether the label can be removed intact.
- Inspect the surface after complete removal.
Electronic Evidence
Physical tearing should be followed by electronic testing. Read the label after partial damage, complete removal and attempted reapplication to confirm whether the project's required failure state is achieved.
- Read and record the intact label.
- Retest after partial tearing.
- Retest after complete removal.
- Retest after attempted transfer.
Check the Mounting Material and Environment
Plastic and Paperboard
These non-metal surfaces may suit the standard construction, but coatings, release agents, texture and curvature affect adhesion. Test the production surface after the normal cleaning process.
Metal Housings
This model is not published as an on-metal NFC label. Direct metal contact can detune the antenna. Review our HF anti-metal tags when the label must be attached to metal.
Printing, Encoding and Identity Mapping
| Order Item | Information to Provide | Approval Check |
|---|---|---|
| Visible artwork | Logo, text, colour and orientation | Legibility within the 26 mm round face |
| Barcode or serial | Code type, data source, sequence and minimum size | Scanner readability on the finished label |
| UID relationship | Rule linking UID with the printed and database record | Sample mapping before production encoding |
| User data | Field names, block locations, format and permissions | Readback through the final application |
| Packaging format | Roll direction, sequence and packing requirements | Compatibility with application and receiving equipment |
Sample Approval Sequence
Confirm the Read Task
Define the phones, readers, data fields and application response required from the label.
Apply to Real Products
Use the actual substrate, curvature, closure position and surface-preparation process.
Verify Data Access
Read the UID and required memory fields with every approved device and application.
Test Attempted Transfer
Retest the label after lifting, tearing, complete removal and attempted reapplication.
Information Needed for a Sample and Quote
Technical Requirements
- Product or package mounting surface
- Available flat diameter and installation position
- Nearby metal, liquid or electronic components
- Reader and smartphone models
- Required data interaction and read distance
- Required physical and electronic tamper response
Order Requirements
- Sample and expected order quantities
- Artwork, barcode and serial-number format
- UID-to-product mapping requirements
- Memory fields and access conditions
- Roll direction and application method
- Packaging and destination country
Anti-Tamper NFC Label FAQs
No universal compatibility should be assumed. Although the chip supports ISO 14443A, access to its UID, memory blocks and written data depends on the phone, operating system and application. Test all intended devices.
That workflow must be confirmed with the chip configuration, record format, phone and application. ISO 14443A support alone does not guarantee automatic URL opening on every mobile device.
The brittle-paper and antenna structure is intended to prevent intact transfer. Because the failure result depends on the surface, adhesive bond and tear path, verify readability after partial tearing, full removal and reapplication.
No. It is a passive NFC label without its own communication power. A user or reader must scan it, and the connected software must recognize a missing, damaged or invalid response.
This model is not published as an on-metal label. Direct metal contact can detune its antenna. Provide the housing material and available clearance so an anti-metal HF construction can be evaluated.
No outdoor durability rating is published. State the expected water, UV, abrasion, temperature and chemical exposure so the standard paper construction or an alternative can be assessed.
Verify surface fit, adhesion, printed-data readability, UID and memory access, phone compatibility, installed read distance, partial-tear response, full removal and attempted transfer.
Validate the FM11RF08 Label on Your Product
Send us the mounting surface, available diameter, phones or readers, required data, artwork, quantity and expected removal result.
Hot Tags: anti tamper nfc label, China anti tamper nfc label manufacturers, suppliers, factory, anti tamper rfid lifespan, rfid security purpose, rfid tamper evident supply, secure rfid price, tamper proof rfid technology, tamper resistant rfid lifespan



















