Our RFID trailer seals tag combines a compact PC housing with an Impinj R6-P UHF chip for trailer dispatch and arrival identification. It can connect the applied seal identity with a vehicle, route, load and assigned trip record at controlled reading points.
RFID Trailer Seals Tag Specifications
Use the listed configuration to confirm reader compatibility, data allocation, attachment clearance and the permitted UHF band for the operating region.
| Specification | Listed Configuration | Trailer Project Requirement |
|---|---|---|
| Tag dimensions | 36 × 20 × 12.5 mm | Check clearance around the door or tie point. |
| Antenna dimensions | 24 × 10 mm aluminum antenna | Test beside the installed trailer structure. |
| Chip | Impinj R6-P | Confirm memory and password configuration. |
| Protocol | ISO 18000-6C Gen2 | Match the reader and middleware setup. |
| TID/UID | 96 bits | Define whether TID is stored in the seal record. |
| EPC memory | Up to 128 bits | Allocate the seal or trip identifier. |
| User memory | Up to 32 bits | Use only for approved compact data. |
| Reserved memory | 32-bit access and 32-bit kill | Assign password ownership and controls. |
| Operating frequency | 920.5–924.5 MHz | Confirm compliance in each operating country. |
| Reference read range | Up to 100 cm in free air | Approve the range after installation. |
| Housing | PC housing | Validate transport and yard conditions. |
| Installation | Tie, tighten, insert or locking style | Specify the cable and closure interface. |
Assign One Seal Record to Each Trailer Trip
The EPC should be issued against a specific vehicle movement instead of being treated only as a general trailer identifier.
Authorize the Load
Create the trip record with the trailer, tractor, route, load and responsible operator.
Issue the Seal
Encode or scan the RFID identity and associate it with the approved dispatch record.
Confirm Departure
Read the applied tag at the outbound checkpoint before the trailer leaves the facility.
Close the Trip
Compare the arrival identity with the expected seal and record the final disposition.
Control Trailer Handover Events
| Handover Event | Identity Check | Record Required | Exception Response |
|---|---|---|---|
| Loading completed | Trailer and load match the dispatch order | Trailer, load, seal EPC and operator | Stop issuance until the records agree |
| Carrier departure | Applied EPC matches the released trip | Gate, departure time and carrier | Hold the trailer for manual review |
| Relay or yard transfer | Expected seal remains assigned to the trip | Location, time and receiving party | Document any seal replacement process |
| Destination arrival | Received EPC matches the expected seal | Arrival time, receiver and result | Isolate mismatched or missing identities |
| Trailer unloading | Opening is approved against the trip record | Removal status and final disposition | Retain evidence under the buyer's procedure |
Choose a Practical Trailer Attachment Position
The selected position must support the required physical closure while keeping the compact UHF antenna readable during dispatch and receipt.
Rear Door Interface
Confirm the latch geometry, available clearance and whether the tag remains protected during door movement.
Curtain-Side Closure
Define the buckle, eyelet or cable route and verify that normal vibration does not load the tag housing.
Cargo Compartment Point
Select a controlled closure away from avoidable impacts and test the effect of adjacent metal structures.
Design the RFID Reading Zone Around the Lane
A short reference range can help create a controlled confirmation point when the reader, vehicle position and operating procedure are coordinated.
Dispatch Desk
- Encode or register the EPC
- Match visible and electronic codes
- Assign the tag to one trip
- Confirm successful readback
Outbound Gate
- Define the trailer stopping position
- Limit reads from neighboring lanes
- Record the released vehicle
- Route mismatches for inspection
Receiving Bay
- Retrieve the expected trip record
- Verify the arriving EPC
- Approve opening responsibility
- Close the seal-use record
Match Printed and Electronic Seal Identities
Visible Marking
- Human-readable serial number
- Barcode or QR code
- Customer text or logo
- Embossing or laser engraving
RFID Configuration
- Approved EPC data structure
- Optional 32-bit user data
- Access and kill passwords
- Encoding verification rules
Trip Data File
- EPC-to-serial relationship
- Duplicate identity screening
- Order and batch reference
- Required output-file format
Test the Complete Trailer Workflow
| Test Stage | Test Method | Acceptance Result |
|---|---|---|
| Attachment fit | Install the selected cable and tag on the actual closure | Secure fit without housing interference |
| Stationary reading | Scan the trailer at the planned gate position | Expected EPC captured without adjacent tags |
| Orientation check | Repeat reads across realistic tag angles | Approved operating window documented |
| Data matching | Compare the EPC, visible code and trip record | All three identities correspond |
| Exception handling | Present an unknown, duplicate or wrong-trip EPC | System blocks or routes the exception correctly |
Information Needed for Configuration
Trailer and Route Details
- Trailer type and closure construction
- Available attachment position
- Required cable dimensions
- Dispatch and receiving workflow
- Operating countries and conditions
RFID and Order Details
- Reader model and antenna arrangement
- EPC and password requirements
- Visible serial or barcode format
- Artwork and encoding data file
- Quantity and destination country
Related RFID Transport Seals
Compare attachment structure, read range, memory, regional frequency and trip-control requirements before selecting another transport seal.
RFID Trailer Seals Tag Questions
The buyer can define the data model, but a security-seal workflow normally associates the applied seal identity with a specific trailer trip, load and dispatch event. The permanent trailer identity can remain a separate record.
No. This passive UHF tag responds within a compatible reader field. Location and trip events come from installed readers, mobile scans, software and other fleet systems rather than continuous GPS transmission by the tag.
No. The listed distance is a free-air reference. The actual result depends on reader power, antenna design, orientation, trailer metalwork, tag position, interference and local operating limits.
The listed frequency is 920.5–924.5 MHz. The permitted UHF band and reader configuration must be confirmed for every country or region included in the transport operation.
We can review synchronized serial numbers, barcodes, engraving and EPC encoding. Provide the data structure, sequence rules, artwork and required electronic output file.
An RFID read confirms that a readable electronic identity is present. The buyer must separately validate the mechanical closure, removal evidence, inspection procedure and system rules used to determine seal integrity.
Please provide the trailer and closure type, attachment position, cable requirement, operating countries, reader models, EPC format, visible marking, encoding data, quantity and destination.
Configure the Seal Around Your Trailer Workflow
Send us the trailer closure, attachment position, cable requirement, operating region, reader setup, EPC rules, artwork, encoding data and quantity for configuration review and pricing.
Request a Trailer Seal ReviewHot Tags: rfid trailer seals tag, China rfid trailer seals tag manufacturers, suppliers, factory, rfid seal for eyewear, rfid seal for forklifts, rfid seal for laptops, rfid seal for pallet jacks, rfid seal for pharmaceuticals, rfid tracking seal



















