RFID Trailer Seals

RFID Trailer Seals

Tamper-Proof Design – Secure locking structure for trailers and containers.
Durable PC Housing – Compact and rugged housing for transportation environments.
Impinj R6-P Chip – Reliable UHF RFID identification with stable read performance.
Up to 128-Bit EPC – Supports flexible identification and tracking data encoding.
Customizable Identification – Supports barcode, serial number, embossing, laser engraving, and encoding.
Send Inquiry
Description

Our RFID trailer seals combine a compact PC housing and Impinj R6-P UHF chip for deliberate, close-range verification of trailer doors, truck compartments and transport assets. The seal can link a visible serial number with an electronic identity during dispatch, driver handover and arrival inspection.

RFID Trailer Seal Specifications

The listed 920.5–924.5 MHz configuration must match the destination country. Confirm the final locking component, trailer hardware and reader before ordering.

Specification Listed Configuration Order Requirement
Tag dimensions 36 × 20 × 12.5 mm Check clearance beside the trailer latch.
Antenna dimensions 24 × 10 mm Confirm orientation beside the metal door.
Chip Impinj R6-P Verify the required memory configuration.
Protocol ISO 18000-6C Gen2 Match the seal with the intended UHF reader.
TID or UID 96 bits Define whether it must be stored with the EPC.
EPC memory Up to 128 bits Provide the fleet or seal-number format.
User memory Up to 32 bits Confirm whether additional on-tag data is needed.
Reserved memory 32-bit access and 32-bit kill Define password ownership and use.
Operating frequency 920.5–924.5 MHz State the destination country and legal band.
Housing PC State temperature, impact and weather exposure.
Reference read range Up to 100 cm in free air Test the installed seal beside the trailer door.
Installation Tie-up, tightening, insertion or locking Provide the complete seal and latch dimensions.
Customization Barcode, serial number, embossing and engraving Submit artwork and variable-data files.

Match the Seal to the Trailer Door

Trailer latch designs vary between fleets, body manufacturers and door types. Selection begins with the actual locking hardware rather than the trailer description alone.

Swing-Door Trailer

Check aligned holes in the handle retainer, latch or added security bracket while both doors are closed.

Roll-Up Door

Identify a compatible hasp or locking point that does not interfere with door movement or dock operation.

Truck Compartment

Confirm the seal path through the compartment latch and protect the tag body from road impact.

Custom Fleet Bracket

Provide a dimensioned drawing when the fleet uses proprietary locking plates or protected seal boxes.

Metal Clearance

Approve the tag orientation beside the trailer body because surrounding metal affects UHF performance.

Removal Access

Leave suitable access for the authorized cutting or release tool without damaging the trailer hardware.

Select the Locking Component

Locking Option Suitable Use Information Required Prototype Check
Flexible wire Offset or narrow trailer-latch holes Wire diameter, length and material Check routing and removal method
Plastic tie Light-duty controlled closures Loop size and required pull strength Inspect tightening and excess tail
Insert pin Aligned holes with a defined diameter Hole diameter and material thickness Confirm insertion and lock engagement
Custom locking part Fleet-specific brackets or enclosures Drawings, samples and installation steps Verify fit on the actual trailer

Create a Fleet Handover Record

1

Assign

Link the EPC, TID and printed seal number with the trailer, route and load record.

2

Apply

Install the seal at the approved latch position and verify its electronic identity.

3

Transfer

Read the seal during driver, depot or carrier handover and store the inspection result.

4

Receive

Compare the arrival identity and physical condition before authorizing trailer opening.

Define Trailer Inspection Results

Inspection Result RFID Check Physical Check Fleet Action
Expected seal EPC and TID match the trip record Seal and latch appear unchanged Continue the authorized route
Wrong seal Identity belongs to another trip or trailer Compare the visible serial number Hold the load for investigation
Unknown seal No approved record exists Photograph the seal and door Do not approve automatically
Damaged seal Tag may remain readable or become unreadable Inspect the tag, lock and trailer latch Apply the incident procedure
Unreadable tag No stable response is captured Check orientation, damage and metal shielding Rescan and verify manually
Authorized removal Trip and receiving records are complete Removal follows the approved procedure Close the seal record

Use RFID Trailer Seals in Fleet Operations

Dispatch Verification

Confirm that the correct seal is assigned to the loaded trailer before it leaves the facility.

Driver Handover

Record the seal identity when responsibility transfers between drivers, carriers or operating teams.

Depot Inspection

Check the presented trailer seal against the expected route record during entry or release.

Loading-Bay Receipt

Verify the RFID and visible identity before unloading or breaking the physical seal.

Warehouse Transfers

Identify sealed trailers and transport units during controlled internal or third-party movements.

Returnable Equipment

Apply the compact tag to compatible cages, cabinets or logistics units requiring close-range checks.

Plan the Close-Range UHF Check

The 100 cm reference range is suited to deliberate trailer inspection rather than automatic long-distance vehicle identification.

Handheld Reader

Drivers or inspectors can approach the selected trailer and verify its seal without opening the door.

Dockside Reader

A reader mounted near a defined inspection point can capture the seal when the trailer is positioned correctly.

Dense Trailer Yard

Use controlled reader power to reduce unintended reads from seals on adjacent trailers.

Printing, Serialization and RFID Encoding

We can coordinate the visible trailer seal number and electronic identity after the locking structure and data format are confirmed.

Visible Identification

  • Trailer or seal serial number
  • Barcode or QR code
  • Company logo and route text
  • Embossing or laser engraving

RFID Data

  • Customer-defined EPC
  • TID and EPC association
  • User-memory data if required
  • Access and kill passwords

Order Reconciliation

  • Printed and encoded ID matching
  • Duplicate-number checking
  • Variable-data input review
  • Finished-data output format

Information Needed for Configuration

Trailer and Seal Details

  • Trailer type and rear-door photographs
  • Latch and sealing-hole dimensions
  • Required wire, tie or locking component
  • Removal tool and inspection procedure
  • Weather, impact and vibration exposure

RFID and Order Details

  • Destination country and frequency band
  • Reader model and inspection distance
  • EPC and password requirements
  • Barcode, artwork and serialization data
  • Quantity and delivery destination

Related RFID Trailer and Transport Seals

Compare latch fit, locking component, frequency, read range and electronic detection requirements before selecting another transport seal.

RFID Trailer Seal Questions

Does this RFID trailer seal fit every door latch? +

No universal fit should be assumed. Provide rear-door photographs, hole dimensions and the required locking component so the attachment can be evaluated.

Is a wire or plastic tie included with the tag? +

The page lists several installation methods but does not define one standard locking component. Confirm the wire, tie or insert construction required for your trailer.

Is the 100 cm reading distance guaranteed? +

No. Up to 100 cm is a free-air reference. Reader output, antenna size, trailer metal, tag orientation and surrounding seals affect the installed distance.

Can this seal be read automatically at a vehicle gate? +

The listed range is intended for relatively close reading. A gate application requires testing of antenna position, lane width, trailer speed and the exact seal location.

Does the RFID chip detect that the seal was cut? +

The listed R6-P specification provides UHF identification but does not establish an electronic cut-detection function. Physical tamper evidence depends on the approved locking construction.

Can the tag operate in Europe or North America? +

The listed frequency is 920.5–924.5 MHz and should not be assumed suitable for every market. State the destination country so an appropriate regional option can be reviewed.

Can the RFID trailer seal be reused? +

Reusability depends on the final locking component. A security seal intended to show opening should normally be treated as one-time use unless the approved construction states otherwise.

What information is required for a quotation? +

Please provide the trailer and latch photographs, sealing-hole dimensions, locking-component requirement, destination country, reader model, EPC format, printing data, quantity and delivery destination.

Match the RFID Seal to Your Trailer Latch

Send us the rear-door photographs, latch dimensions, required locking component, operating region, reader model, EPC rules, artwork and quantity for configuration review and pricing.

Request an RFID Trailer Seal Review

Hot Tags: rfid trailer seals, China rfid trailer seals manufacturers, suppliers, factory, rfid identification seal, rfid seal for bakery products, rfid seal for chemicals, rfid seal for confectionery, rfid seal for drawers, rfid tracking seal

Send Inquiry

(0/10)

clearall