NFC Plastic Seal Security Tags

NFC Plastic Seal Security Tags

NFC Plastic Seal Security Tags support data encryption and tamper detection, ensuring data and user security.
Measuring only 19.5 × 20 × 0.45 mm, the tags maintain stable performance even in harsh environments.
They feature 1024 bits of user memory and support TID/UID and EPC/Block, meeting diverse data management needs.
Built-in anti-tamper and detection sensors ensure secure logistics and asset management.
Operating at a frequency of 13.0–14.5 MHz, they offer a read distance of up to 4.4 cm in interference-free conditions.
Send Inquiry
Description

Our NFC plastic seal security tags combine an FM13HS01-P chip, compact copper antenna and detection structure in a 19.5 × 20 × 0.45 mm insert-style component. They are designed for deliberate close-range checks at protected packages, asset enclosures and controlled access points.

NFC Plastic Seal Security Tag Specifications

The listed configuration uses ISO 15693 communication at 13.0–14.5 MHz and provides identity, block, user and reserved memory areas.

Specification Listed Configuration Selection Requirement
Tag dimensions 19.5 × 20 × 0.45 mm Confirm the slot, recess and available clearance.
Antenna dimensions 17.73 × 10.86 mm Keep metal clear of the copper antenna where possible.
Chip FM13HS01-P Confirm reader commands and detection support.
Protocol ISO 15693 Select a reader that explicitly supports this protocol.
Memory TID/UID, EPC/Block, 1024-bit User and Reserve Approve the memory map before encoding.
Operating frequency 13.0–14.5 MHz Verify performance with the intended HF device.
Surface layer Protective ink overlay Check abrasion and handling requirements.
Reference read range Up to 4.4 cm in open-air conditions Test after installation in the final enclosure.
Installation method Insertion Define the insertion direction and retention structure.
Characteristics Tamper-evident structure and detection sensor Define the expected intact and opened responses.

Design the Plastic Closure Around the Tag

The seal component must fit the receiving structure, remain readable after insertion and respond as expected when the protected closure is opened.

1

Measure the Slot

Record the receiving opening, internal depth, surrounding wall thickness and insertion direction.

2

Check Nearby Materials

Identify metal, liquid, carbon-filled plastic or other materials near the compact antenna.

3

Define Retention

Confirm how the tag is held in position and how normal opening affects its detection structure.

4

Test the Assembly

Verify the intact and opened results with the final enclosure and approved reader.

Where Compact Plastic Seal Tags Fit

This format is suited to small protected closures where an operator can deliberately position an HF reader near the seal.

Asset access

Equipment Enclosures

Identify access points on service equipment, instrument cases and controlled technical assemblies.

Warehouse

Reusable Bins and Totes

Associate an individual container with inventory, dispatch, return or quarantine records.

Package control

Protected Parcels

Add a close-range electronic identity to a compatible plastic locking or insertion feature.

Maintenance

Service Access Points

Link the seal identity with inspection, calibration or authorized maintenance records.

Custody

Document and Sample Cases

Support controlled handovers where the receiving operator checks one sealed case at a time.

Brand control

High-Value Product Closures

Connect a physical closure with a buyer-managed product or verification record.

Select the Correct HF Reading Device

Compatibility must be checked against ISO 15693, the required memory commands and the detection function-not simply against the word NFC.

Device Type Required Capability Suitable Task Test Before Approval
Industrial handheld ISO 15693 and required chip commands Warehouse and field inspection Identity, memory and condition reading
Fixed HF reader Suitable antenna and short installation distance Controlled equipment or issue stations Read consistency in the final fixture
Desktop encoder Required writing and verification functions Tag issue and data preparation Write and read-back of every field
NFC-enabled phone ISO 15693 hardware and application support Mobile checking where confirmed Each phone model and software version

Build a Controlled Seal Record

Keep compact identifiers on the tag and maintain detailed history, permissions and exception records in the connected system.

Tag Identity

  • TID or UID
  • Asset or package identifier
  • Printed serial relationship
  • Product or location code

User-Memory Data

  • Project-defined short record
  • Owner or department code
  • Issue or inspection reference
  • Approved access configuration

System History

  • Installation operator and time
  • Expected seal condition
  • Handover and inspection events
  • Opening and replacement details

Inspection and Exception Workflow

Reader Result System Check Required Action
Expected identity and condition Tag matches the active asset or package Complete the approved inspection or handover
Unknown identity No matching active record is available Hold the item for identification review
Unexpected changed condition No authorized opening is recorded Start the buyer's exception procedure
No tag response Reader compatibility or physical damage is possible Inspect the device, placement and sealed item
Authorized opening The event matches approved work or custody data Record the opening and assign a replacement seal

Applied-Sample Qualification

Mechanical Checks

  • Insertion-point dimensions
  • Retention after installation
  • Clearance during normal handling
  • Response to controlled opening
  • Protective overlay condition

Electronic Checks

  • ISO 15693 reader compatibility
  • Read distance after insertion
  • Memory writing and read-back
  • Detection-result interpretation
  • Identity-to-record matching

Customization and Data Preparation

We can review the chip data, visible identification and output records after the closure design and reading workflow are confirmed.

Electronic Configuration

  • Memory-field allocation
  • Identifier and coding format
  • Access-setting requirements
  • Read-back verification rules

Visible Identification

  • Sequential serial number
  • Barcode or QR code
  • Logo and product text
  • Required color and contrast

Order Records

  • Variable-data input file
  • UID-to-printed-code mapping
  • Encoding result file
  • Quantity and delivery batches

Information Needed for Configuration

Closure Details

  • Sealed product or enclosure type
  • Slot and recess dimensions
  • Installation and opening sequence
  • Nearby metal, liquid or electronics

System Details

  • Reader or phone model
  • Required reading distance
  • Software and command support
  • Expected detection workflow

Order Details

  • Memory and encoding requirements
  • Artwork and numbering rules
  • Quantity and delivery schedule
  • Destination country

Related NFC and RFID Security Seals

Compare protocol, installation structure, reader compatibility, read distance and detection requirements before selecting another security seal.

NFC Plastic Seal Questions

Is this a complete plastic cable seal? +

The listed component measures 19.5 × 20 × 0.45 mm and uses an insertion method. Provide the complete closure drawing so its fit and function within the final plastic seal assembly can be evaluated.

Can every NFC phone read the tag? +

No universal phone compatibility should be assumed. The tag uses ISO 15693, so the phone hardware, operating system and application must explicitly support the required protocol and functions.

What reading distance should the project use? +

The listed open-air reference is up to 4.4 cm. The approved operating distance must be measured after insertion into the actual plastic enclosure with the intended reader.

Can the tag be mounted close to metal? +

Metal near the 17.73 × 10.86 mm copper antenna can alter HF performance. Submit the assembly materials and spacing so an applied sample can be tested.

Does the tag alone authenticate a product? +

The tag supplies an electronic identity, memory and detection capability. A positive product-authentication result also depends on the approved chip functions, encoded data, application and authoritative backend record.

How much user memory is available? +

The listed configuration provides 1024 bits of user memory together with TID/UID, EPC/Block and reserved areas. Confirm the exact memory allocation and access rules before encoding.

What information is required for a quotation? +

Please provide the enclosure drawing, insertion-point dimensions, nearby materials, reader models, memory and detection requirements, artwork, coding format, quantity and destination country.

Match the NFC Seal to Your Plastic Closure

Send us the closure drawing, insertion dimensions, surrounding materials, reader models, memory requirements, detection workflow, artwork and quantity for configuration review.

Request an NFC Plastic Seal Review

Hot Tags: nfc plastic seal security tags, China nfc plastic seal security tags manufacturers, suppliers, factory, RFID Container Seal, rfid seal for decoders, rfid seal for document, rfid seal for filters, rfid seal for relays, rfid seal for supply chain

Send Inquiry

(0/10)

clearall