Our tamper detection induction seal combines an NTAG424 DNA TT chip, printable coated-paper face and adhesive sensing structure in a 105 × 30 mm format. It is designed for close-range NFC inspection of equipment covers, service compartments, calibration points and other protected openings.
Tamper Detection Induction Seal Specifications
The compact HF/NFC seal provides a unique chip identity, user memory and tamper-status capability for compatible verification systems.
| Specification | Available Configuration |
|---|---|
| Seal dimensions | 105 × 30 × 0.2 mm |
| Chip family | NTAG424 DNA TT |
| Listed chip options | NT4H2421TTDUD/02 and NT4H2421Tx variants |
| UID | 7 bytes |
| User memory | 416 bytes |
| Operating frequency | 13.0–14.5 MHz |
| Face material | Printable coated paper |
| Reference read range | Up to 1.5 cm, reader dependent |
| Installation | Adhesive backing |
| Standard color | White, with customization available |
| Security feature | Tamper proof and tamper detection |
Protect Service and Inspection Access Points
We configure the seal for openings where technicians, inspectors or asset owners need to confirm identity and seal condition at close range.
Equipment Covers
Bridge a removable cover and fixed housing so access movement affects the sensing path.
Calibration Access
Protect adjustment points that should remain closed between authorized calibration or inspection events.
Warranty Compartments
Associate a seal with the product record before dispatch and check its condition during warranty service.
Controlled Cabinets
Apply the seal across a small cabinet door, drawer or access panel requiring local verification.
Build a Controlled Opening Workflow
| Workflow Stage | NFC Action | System Record |
|---|---|---|
| Seal registration | Read and assign the seal to the protected item | Seal UID, asset and installation record |
| Pre-service inspection | Tap the intact seal before opening | Identity and pre-opening status |
| Authorization | Confirm the service or inspection request | Approved user, reason and time |
| Opening | Break or separate the protected seal path | Detected status when subsequently interrogated |
| Service completion | Close the access point and apply a new seal | Retired and replacement seal relationship |
| Later inspection | Read the current seal and compare the record | Expected, unknown or mismatched condition |
Use Separate Layers for Verification
Physical Seal
The adhesive label bridges the opening and carries the tamper-detection structure.
Chip Identity
The NFC chip presents its UID and configured data to a compatible reading device.
Status Reading
The reader or phone retrieves the available tag and tamper-state information.
System Decision
The connected application compares the result with the expected asset and service record.
Define Each Inspection Result
| Observed Result | Possible Meaning | Operational Response |
|---|---|---|
| Expected intact status | The assigned seal responds as configured | Continue the approved inspection process |
| Detected tamper state | The sensing path has changed | Compare the result with authorized opening records |
| Unknown seal identity | The UID is not assigned to the inspected item | Hold the item and investigate the seal source |
| No NFC response | The tag is damaged, misplaced or outside reading conditions | Repeat the tap and perform a visual inspection |
| Seal assigned to another item | The physical and database records do not match | Stop acceptance and investigate the mismatch |
| Authorized retired seal | The original seal was opened under an approved task | Verify the replacement-seal record |
Select a Suitable Installation Surface
Flat Plastic Housing
Use a clean, smooth area that lets the seal bridge the removable and stationary components.
Coated Carton or Package
Confirm adhesion on the actual coating and position the sensing section across the opening path.
Metal Equipment Surface
Provide the complete metal structure and intended position because conductive surfaces can alter NFC performance.
Configure Printing, NFC Data and Records
Visible Information
- Company logo and security text
- Asset or equipment number
- Variable serial number
- QR code or barcode
NFC Configuration
- Application-specific identifier
- Approved NDEF content
- Verification URL structure
- Required access configuration
Database Relationship
- UID and printed-code mapping
- Asset and seal assignment
- Opening and replacement history
- Inspection result retention
Test the Seal on the Actual Equipment
Apply
Install the seal on the cleaned production surface using the intended position and pressure.
Register
Read the intact seal and assign its identity to the correct equipment or access point.
Open
Operate the protected cover or compartment using the normal service procedure.
Verify
Read the seal again and confirm the physical, NFC and software results match the workflow.
Information Required for Configuration
Protected Access Point
- Equipment or package dimensions
- Opening direction and travel
- Surface material and coating
- Available application area
- Storage and service environment
NFC Verification
- Required chip and security functions
- Phone or NFC reader models
- Verification application or URL
- Artwork and encoding content
- Quantity and delivery country
Tamper Detection Induction Seal Questions
The seal is positioned so opening affects its tamper-detection path. A compatible NFC device can then retrieve the available tag status for interpretation by the connected application.
No. This is a passive HF/NFC seal. Any warning, notification or alarm must be generated by compatible reading equipment and the connected software after obtaining the seal result.
Compatibility depends on the phone, operating system, application and configured chip functions. Test the intended phone models and verification software before deployment.
This close-range NFC configuration is generally intended for deliberate one-at-a-time tapping. Projects requiring rapid simultaneous reading should be evaluated with an appropriate UHF RFID solution.
The seal is intended for one-time tamper-detection use. Retire the opened seal record and apply a newly registered seal when the access point is closed again.
Metal can change the performance of a standard NFC antenna. Provide the housing structure, application position and reading device so the required construction can be evaluated.
Please provide the protected access point, surface material, opening movement, chip requirements, phone or reader models, verification workflow, artwork, encoding content, quantity and destination country.
Configure NFC Tamper Detection for Your Access Point
Send us the equipment or package structure, protected opening, surface material, phone or reader model, verification workflow, artwork, encoding requirements and quantity for review.
Request an Induction Seal ReviewHot Tags: tamper detection induction seal, China tamper detection induction seal manufacturers, suppliers, factory, rfid seal for anti-virus software, rfid seal for cables, rfid seal for cement, rfid seal for insulation materials, rfid seal for intrusion detection systems, rfid seal for tobacco



















