Our NFC wine bottle sticker combines a compact JT5501 inlay, printable coated-paper face and one-time adhesive seal. It supports close-range bottle identification while creating visible evidence if the sticker is lifted, torn or removed from the protected closure.
NFC Wine Bottle Sticker Specifications
This compact construction is intended for bottle closures and packaging areas where close NFC reading and visible removal evidence are required.
| Specification | Available Configuration | Selection Requirement |
|---|---|---|
| Sticker dimensions | 52 × 25 × 0.2 mm | Confirm the available closure area. |
| Antenna dimensions | 47 × 20.7 mm | Keep the active area away from sharp folds. |
| Chip | JT5501 | Confirm the required data and configuration. |
| Protocol | ISO 14443A | Test the intended NFC phones and readers. |
| Operating frequency | 13.0–14.5 MHz | Evaluate performance on the finished bottle. |
| Reference read range | About 1 cm in free air | Approve the tap point and reading angle. |
| Face material | Printable coated paper | Confirm printing and surface-finish needs. |
| Installation | Adhesive backing | Check bottle, cap and packaging surfaces. |
| Security characteristic | One-time tamper-evident structure | Approve the visible result after removal. |
Create a One-Time Seal Across the Opening Route
The sticker should connect two surfaces that separate during opening, making removal or reuse visibly detectable during inspection.
Select the Closure
Identify the cap, capsule, flap or package joint that must remain sealed before sale or service.
Bridge Both Surfaces
Position the sticker so it bonds to the movable closure and the stationary bottle or package.
Keep NFC Accessible
Leave the intended tap area accessible to the approved phone or short-range NFC reader.
Inspect After Opening
Check tearing, lifting, adhesive transfer and readability against the approved acceptance standard.
Choose the Sticker Position by Closure Type
Bottle Cap and Neck
Bridge the cap or capsule to the bottle neck where normal opening will place controlled stress on the sticker.
Presentation Box
Seal the box flap or access edge when NFC identification is required before the bottle is removed.
Collectible Packaging
Place the sticker on a protected opening without covering mandatory product or regulatory information.
Handle Each Inspection Result Consistently
Receiving, retail and hospitality teams should use the same criteria when a bottle arrives intact, damaged or inconsistent with its digital record.
| Observed Condition | NFC Result | Inspection Decision | Recommended Action |
|---|---|---|---|
| Sticker intact | Expected record opens | Continue normal inspection | Compare visible bottle data with the record |
| Sticker torn | Readable or unreadable | Treat as evidence of opening or damage | Apply the buyer's exception procedure |
| Edge lifted | Expected record opens | Check possible removal or poor adhesion | Quarantine if the acceptance limit is exceeded |
| Sticker missing | No sticker available | Bottle identity cannot be checked by this seal | Verify against shipment and packaging records |
| Printed data mismatch | Different product record opens | Do not accept the verification result | Investigate printing or encoding assignment |
| Sticker unreadable | No NFC response | Check damage and reading conditions | Rescan with the approved device and position |
Match Adhesion to the Finished Bottle
A tamper-evident sticker depends on reliable bonding. Surface condition, curvature and application pressure must be evaluated with production-representative bottles.
Surface Preparation
- Remove dust, oil and condensation
- Check glass and closure coatings
- Control the application temperature
- Avoid touching the adhesive area
Application Control
- Use the approved orientation
- Apply even pressure across the sticker
- Avoid bubbles and sharp creases
- Allow the required bonding time
Removal Evaluation
- Inspect paper tearing
- Check adhesive transfer
- Record lifting around curved edges
- Confirm the sticker cannot be reused intact
Customize Visible and NFC Information
Brand Printing
- Logo and wine name
- Monochrome or color artwork
- NFC tap instruction
- Vintage or batch reference
- Required opening warning
Variable Identification
- Sequential serial number
- Barcode or QR code
- Individual bottle identifier
- Batch-specific printed data
- Personalized coding
NFC Configuration
- Approved product-information URL
- Compact database identifier
- Required encoding format
- Printed-to-digital matching
- Finished encoding output file
Validate the Sticker Before Volume Production
Apply
Install samples on the actual bottle, cap, capsule or presentation package.
Condition
Expose the applied samples to expected storage, handling and distribution conditions.
Read
Verify the NFC result with the intended phone or reader at the approved tap position.
Remove
Open or peel the sticker and compare the visible damage with the acceptance criteria.
Information Required for Configuration
Physical Application
- Bottle and closure photographs
- Application-area dimensions
- Glass, cap and capsule materials
- Expected storage conditions
- Required evidence after removal
Printing and Data
- Artwork and color requirements
- Variable printed-data format
- NFC content and destination URL
- Target phone or reader model
- Quantity and destination country
Related Wine Bottle Security Labels
Compare sticker size, chip type, reading distance, face material and tamper method before selecting another wine-bottle label.
NFC Wine Bottle Sticker Questions
Is this sticker designed for one-time use? +
Yes. The coated-paper security structure is intended to show visible damage after removal so the original sticker cannot be transferred intact for normal reuse.
Does the JT5501 chip detect an opened bottle electronically? +
This listed configuration is based on a physical tamper-evident sticker. Do not assume electronic opening-state detection unless a different chip and construction are specifically confirmed.
Can a smartphone read the sticker? +
A compatible NFC-enabled smartphone can read the configured ISO 14443A sticker. The intended phone models and final bottle position should be tested before production.
Is the 1 cm reading distance fixed? +
No. It is a reference measured under suitable conditions. The phone, antenna alignment, bottle contents, metallic decoration and installation position affect actual performance.
Can the sticker be applied over metallic foil? +
Metallic foil can interfere with a standard NFC antenna. Provide the complete closure construction so the proposed position can be tested on finished bottles.
Can we add individual serial numbers and URLs? +
We can review variable printing, personalized coding and NFC encoding after the data format, destination URL and matching requirements are confirmed.
What information is required for a quotation? +
Please provide the bottle and closure structure, application area, target device, artwork, printed data, NFC content, quantity and destination country.
Configure Your NFC Bottle Seal Sticker
Send us the bottle and closure structure, application position, target phone or reader, artwork, printed data, NFC content and quantity for configuration review and pricing.
Request an NFC Sticker ReviewHot Tags: nfc wine bottle stickers, China nfc wine bottle stickers manufacturers, suppliers, factory, rfid seal for composting, rfid seal for demodulators, rfid seal for enterprise resource planning systems, rfid seal for intrusion detection systems, rfid seal for mining, rfid seal for plls
