Compact UHF Sticker for Detectable Removal
Our UHF RFID Tamper Evident Sticker combines a printable adhesive label with a brittle antenna structure intended to prevent intact transfer. The published 62 × 30 mm version uses an R6-P chip and is designed for suitable non-metal products, packages and assets.
The sticker should be approved as part of the item, not as a stand-alone component. Surface coating, closure movement, reader position and the required post-removal result determine whether the configuration is suitable.
Use the Sticker Where Removal Creates Evidence
A tamper-evident sticker is most useful when its position makes substitution, opening or transfer physically disturb the label or antenna.
Across a Closure
Place the sticker so the intended opening action stresses the bonded label rather than bypassing it.
On One Assigned Item
Bind the encoded EPC to one package or asset and reject an identity that has been removed for reuse.
Within the Read Zone
Keep the antenna flat and orient each sticker consistently for repeatable interrogation.
Published 62 × 30 mm Sticker Specification
| Product type | UHF RFID Tamper Evident Sticker |
|---|---|
| Finished dimensions | 62 × 30 × 0.3 mm |
| Chip | R6-P |
| Protocol | ISO 18000-6C Gen2 |
| Memory | 96-bit TID/UID; EPC up to 128 bits; user memory up to 32 bits; 32-bit access and 32-bit kill passwords |
| Operating frequency | 860–960 MHz |
| Face material | Printable coated paper |
| Installation | Adhesive mounting |
| Published read reference | Up to 3 m, depending on the reader, surface and installation |
| Security structure | Tamper-evident / brittle antenna |
Match the Sticker to the Tagged Surface
| Surface or item | Placement priority | Risk to check | Sample decision |
|---|---|---|---|
| Coated carton closure | Bridge the intended opening line | Coating release, fiber tear and fold movement | Evidence remains recognizable after normal opening |
| Rigid plastic housing | Use a clean, flat bonded area | Low surface energy, texture and curvature | No edge lift in use; removal damages the sticker |
| Glass container | Avoid condensation and sharp bends | Cleaning residue and adhesive dwell time | Bonding, read range and peel response pass together |
| Metal product | Select an on-metal RFID construction | UHF antenna detuning | Do not apply the standard non-metal read reference |
| Liquid-filled package | Increase separation from liquid where possible | Absorption and read-zone shadowing | Verify all intended orientations and fill states |
Visible print file
We coordinate the printable area with the antenna and die line before production release.
- Logo, fixed text and regulatory marks
- Sequential serial or batch number
- Barcode or QR code, subject to proof
- Print direction relative to the roll
- Readable quiet zones and safe margins
RFID data file
Provide the encoding rule and output format so visible and electronic identities can be checked together.
- EPC structure and number range
- User-memory data where applicable
- Password and memory-locking instructions
- Visible-code to EPC mapping
- Reject handling and verification output
Sample Approval Before a Production Roll
Confirm the item
Send the material, coating, shape, available area and closure action.
Define the response
State the visible and RFID result required after attempted removal.
Test the system
Evaluate bonding, reading, opening and peel response on the actual item.
Release the roll
Approve proof, encoded data, roll direction, core and packing marks.
UHF RFID Tamper Evident Sticker FAQs
The brittle antenna structure is intended to be disturbed during removal so the sticker cannot be transferred intact as an ordinary reusable credential. The exact visible damage and post-removal RFID response must be verified on the approved surface.
No. The available flat area, opening line, curvature, coating, nearby metal or liquid and required print content must fit the approved die and antenna position. Request a different configuration if the published format does not fit.
A conventional UHF sticker can be detuned by direct metal mounting. Use a dedicated on-metal construction and validate both the read zone and tamper response on the final metal item.
No. It depends on the reader, antenna, output power, sticker orientation, surface and surrounding materials. Approve samples at the shortest and longest required read positions in the actual installation.
We can review sequential text, barcode or QR artwork together with EPC and supported memory requirements. Provide sample records, numbering rules, lock settings and the required visible-code-to-EPC mapping format.
Provide the applicator model, unwind direction, label orientation, gap, core requirement, maximum roll diameter and splice rule. These details must be coordinated with the approved die and artwork.
Send the tagged item, surface, closure position, available area, required tamper response, reader model, destination country, target range, artwork, encoding rules, quantity and roll-packing requirements.
Test the Sticker on Your Final Package
Send the surface, closure position, reader setup, required removal evidence, artwork, encoding data, roll specification and order quantity.
Hot Tags: uhf rfid tamper evident sticker, China uhf rfid tamper evident sticker manufacturers, suppliers, factory, anti tamper rfid benefit, rfid anti tamper application, rfid anti tamper durability, rfid tamper evident reliability, secure rfid compatibility, tamper resistant rfid provision
