Tamper Proof Dual Frequency Stickers

Tamper Proof Dual Frequency Stickers

It has high anti-counterfeiting properties and cannot be copied or tampered with.
Combines the long-distance reading of ultra-high frequency and the strong penetration of high frequency.
Can store rich product information, such as production batch, date, etc.
Can adapt to a variety of different application scenarios and industry needs.
Send Inquiry
Description

Long-Range UHF and Close-Range NFC in One Sticker

Our tamper-proof dual frequency sticker uses an EM4423 chip with 13.56 MHz NFC and 860–960 MHz UHF interfaces. Its elongated 110 × 40 × 0.1 mm format contains a 105 × 35 mm copper antenna and a printable coated-paper face for serialized product, asset and package identification.

The UHF interface supports operational identification at a distance, while the NFC interface provides a controlled near-field interaction. The tamper-proof construction is intended to damage the RFID structure during attempted transfer, but the result must be validated on the final mounting surface.

UHF

860–960 MHz Operational Reading

Use the UHF interface with compatible fixed or handheld equipment for warehouse identification, asset audits and logistics checkpoints. The published free-air range is up to 8 metres.

+
NFC

13.56 MHz Near-Field Interaction

Use the NFC interface for deliberate close-range verification or access to approved product information. Confirm the intended phones, readers, application and record format during pilot testing.

Unlike dual-chip constructions, this model is published with one EM4423 dual-frequency chip. The exact data visibility and access behaviour through each interface should still be confirmed in the encoding specification.

EM4423 Dual-Frequency Sticker Specifications

Specification Published Configuration Procurement Check
Finished sticker size 110 × 40 × 0.1 mm Confirm a flat area large enough for the entire sticker.
Antenna size 105 × 35 mm copper antenna Keep the antenna area away from folds, edges and metal.
Chip EM4423 Confirm data access through both NFC and UHF interfaces.
Published protocols NFC and ISO 18000-6C Gen2 Verify the selected NFC devices and UHF readers.
Operating frequencies 13.56 MHz and 860–960 MHz Confirm the destination-market UHF configuration.
TID/UID 96 bits Define how the identifier is used in the database.
EPC/block memory 128 or 224 bits Select the required configuration before preparing data.
User memory 64 or 160 bits Select the memory option and define the stored fields.
Reserve memory 64 bits Confirm password and access-control requirements.
Face material Printable coated paper Confirm indoor conditions and required print durability.
Published free-air range Up to 8 m, reader dependent Measure installed UHF range in the final read zone.
Installation Adhesive Test bonding and removal response on the actual surface.
Standard colour White; customization available Approve artwork, variable data and finished appearance.
Security characteristic Tamper-proof Verify NFC and UHF responses after attempted removal.

Choose This Sticker When UHF Range Is a Priority

1

Large Copper Antenna

The 105 × 35 mm antenna is substantially larger than the antennas used in compact dual-frequency labels. This makes the model a better candidate when the project prioritizes UHF operating distance over a small label footprint.

2

One Dual-Interface Chip

The EM4423 configuration provides NFC and UHF access through one dual-frequency chip rather than combining two separate chips. Buyers should define which fields are available through each interface.

3

Printable Security Sticker

The coated-paper face can carry visible product information, barcodes and variable serials. Printed data should be mapped to the RFID identity when the system requires item-level verification.

Check Whether 110 × 40 mm Fits the Product

Installation Factor Why It Matters Sample-Test Requirement Risk If Ignored
Available flat area The full 105 × 35 mm antenna should remain flat. Apply the sticker in the intended production position. Creasing can change performance or damage the structure.
Metal proximity This model is not published as an on-metal tag. Include nearby metal, batteries or electronics. UHF and NFC performance may be detuned.
Liquids or dense contents Product contents can alter UHF propagation. Test filled products rather than empty packaging. Free-air range may not represent installed range.
Surface texture Adhesive contact affects both retention and tamper response. Use the final coating, texture and cleaning process. The sticker may lift without the intended damage.
Outdoor exposure The published face material is coated paper. State exposure to water, UV, abrasion and chemicals. The face or printed data may not suit the environment.
For direct metal mounting, compare our UHF anti-metal tags. A different construction may be necessary when both NFC and UHF operation are required near metal.

Build One Product Identity Across Two Read Modes

UHF Operations

Define the EPC length, UHF reader settings, expected read zone and any user-memory data required during inventory or logistics handling.

  • Destination-market UHF band
  • EPC structure and sequence
  • Required user-memory fields
  • Portal, handheld or fixed-reader workflow
  • Rules for duplicate or unexpected reads

NFC Interaction

Define what an authorized user should see or do after an NFC interaction. Confirm the device, application, record type and server-side response before encoding.

  • Supported phone or NFC reader
  • Required URL or data record
  • Read-only or update permissions
  • Online and offline behaviour
  • Invalid or retired-item response
The sticker does not determine authenticity on its own. Your application must compare the captured identity with an authorized database record and return the appropriate product status.

Validate the Tamper-Proof Structure

Test Stage Physical Inspection UHF Inspection NFC Inspection
After application Check full contact without bubbles or lifted edges. Record the installed read range and orientation. Confirm the intended phone or reader interaction.
After edge lifting Inspect the first point of structural damage. Check whether performance changes or stops. Check whether the near-field interface still responds.
After partial peeling Record antenna, face and adhesive damage. Retest from the original read position. Retest with the approved NFC device.
After complete removal Check whether intact transfer is possible. Verify whether UHF identification remains possible. Verify whether NFC interaction remains possible.
After reapplication Inspect visible evidence and bond quality. Confirm the final electronic response. Confirm the final electronic response.
A passive RFID sticker does not independently send a tamper alert. A reader must interrogate the tag, and the connected system must interpret a missing or changed response according to the approved workflow.

Printing and Memory Options to Confirm

Visible Information

Submit the logo, product text, barcode or QR code, variable serial format, colour and orientation. The artwork must fit within the 110 × 40 mm finished sticker.

Memory Configuration

The page lists alternative EPC and user-memory capacities. Confirm whether the project requires 128- or 224-bit EPC/block memory and 64- or 160-bit user memory.

Data Relationship

State how the printed serial, barcode, UHF identity and NFC interaction should correspond. Provide a clear sequence rule and required output-file format.

Recommended Pilot Sequence

Confirm Product Fit

Check that the complete 110 × 40 mm sticker can remain flat on the intended surface.

Approve Data Access

Read the encoded information through both interfaces using the intended devices.

Measure Installed Range

Test UHF performance with the final reader, antenna position, product and orientation.

Test Attempted Transfer

Inspect the sticker and retest NFC and UHF after partial removal and reapplication.

Information Needed for a Sample and Quote

Technical Requirements

  • Product and mounting-surface material
  • Available flat label area
  • Nearby metal, liquid, battery or electronics
  • Destination country and target UHF range
  • UHF reader and NFC device models
  • Required post-removal response

Order and Data Requirements

  • Sample and expected order quantities
  • Selected EPC and user-memory capacities
  • UHF data and NFC record requirements
  • Artwork and variable serialization
  • Data-mapping and access-control rules
  • Roll direction, packaging and destination

Tamper-Proof Dual Frequency Sticker FAQs

Does the sticker use one chip or two separate chips? +

The published configuration uses one EM4423 dual-frequency chip with NFC and UHF interfaces. Confirm the required memory option and which information must be accessible through each interface before encoding.

Is the UHF reading range 8 metres or more than 10 metres? +

The specification table publishes up to 8 metres in free air, while another statement on the original page mentions more than 10 metres. We recommend using 8 metres only as a preliminary reference and validating the installed read zone.

Can the NFC interface be read by every smartphone? +

Compatibility depends on the phone, operating system, antenna position, application and encoded record. Test the intended devices and user interaction before approving the sticker.

Does removal automatically generate a tamper alert? +

No independent alert is generated by a passive sticker. If removal damages the RFID structure, a reader may later receive no valid response. The connected system must detect and interpret that condition.

Is the coated-paper face suitable for outdoor equipment? +

The published face material is printable coated paper, but no specific outdoor durability rating is provided. Submit the water, UV, abrasion, temperature and chemical exposure requirements for construction review.

Can the sticker be applied directly to metal? +

This model is not published as an on-metal sticker. Direct metal contact can detune the antenna. Provide the metal structure, available clearance and required NFC and UHF performance for evaluation.

What should we include in the pilot evaluation? +

Check surface fit, adhesion, printed appearance, encoded data, phone compatibility, installed UHF range, unwanted reads, partial-removal response, complete removal and attempted reapplication.

Validate the EM4423 Sticker in Both Read Modes

Send us the product surface, available space, destination market, readers, NFC devices, memory option, target range, artwork and tamper-test requirements.

Request EM4423 Sticker Samples & Quote

Hot Tags: tamper proof dual frequency stickers, China tamper proof dual frequency stickers manufacturers, suppliers, factory, anti tamper rfid improvement, anti tampering rfid quality, rfid anti tamper industry, rfid protection performance, secure rfid quality, tamper resistant rfid aim

Send Inquiry

(0/10)

clearall