Anti-Tamper UHF Tag for Packaging and Asset Control
Our anti-tamper UHF RFID tag is a 157 × 36 × 0.2 mm adhesive label with a 113.5 × 15 mm antenna, G2IL+ chip and a listed tamper-detection characteristic. It supports ISO 18000-6C Gen2 and operates at 865–868 MHz.
The published free-air reading distance is up to 4 m, depending on the reader and environment. The elongated format can be evaluated across a package opening or incorporated into a larger product, jewelry or asset label where both identification and interference detection are required.
A Sensor Characteristic Still Requires System Logic
Assign
Link the EPC and, where required, TID to one asset, product or package record.
Install
Position the functional section where opening, lifting or transfer will disturb it.
Interrogate
Use a compatible UHF reader and application logic to evaluate the expected tag response.
Inspect
Investigate unexpected or missing responses before updating the record or issuing a replacement.
Anti-Tamper UHF RFID Tag Specifications
| Specification | Published Value |
|---|---|
| Tag dimensions | 157 × 36 × 0.2 mm |
| Antenna dimensions | 113.5 × 15 mm |
| Chip | G2IL+ |
| Protocol | ISO 18000-6C Gen2 |
| TID/UID | 64 bits |
| EPC/Block memory | 128 bits |
| User memory | 0 bits |
| Reserved memory | 32-bit access password and 32-bit kill password |
| Operating frequency | 865–868 MHz |
| Construction | Dual silicon and transparent PET liner |
| Installation | Adhesive attachment |
| Published read range | Up to 4 m in free air, reader dependent |
| Characteristic | Tamper proof and detection sensor |
The 865–868 MHz configuration is not suitable for every market. Confirm the destination country and installed reader frequency before sampling or bulk production.
Use EPC for Identification and the Database for Details
128-Bit EPC
Use EPC memory for the item or package identifier that the reader sends to the application.
64-Bit TID
Capture the TID when the controlled record requires an additional chip-level reference.
No User Memory
Store product attributes, transaction history and verification status in the linked database.
Match the Long Label to the Physical Security Point
| Application | Placement Objective | Required Validation |
|---|---|---|
| Jewelry presentation packaging | Bind the package or display tag to one serialized record | Nearby metal, label visibility and approved read point |
| High-value product packaging | Bridge the controlled opening or removal path | Tamper response, adhesion and package damage tolerance |
| Asset housing | Detect unauthorized lifting or reassignment | Surface curvature, RF performance and replacement procedure |
| Transfer between stores | Update item status at controlled receiving points | Reader placement, EPC mapping and exception rules |
| Metal-backed item | Requires a construction designed for metal proximity | Evaluate a suitable UHF anti-metal tag |
Define How a Tamper Exception Will Be Detected
| Inspection Method | Best Use | Decision Rule | Risk to Control |
|---|---|---|---|
| Handheld reader | Inventory and exception inspection | Compare the tag response with the assigned item record | Operator distance and inconsistent orientation |
| Fixed verification station | Packing, transfer or returns desk | Accept only the expected EPC and status | Reads from nearby unprocessed items |
| Doorway or portal reader | Controlled movement between zones | Associate reads with a defined transaction event | Cross-reads and missing item context |
| Visual plus RFID check | Returns and disputed-condition review | Combine physical evidence with RF and database status | Treating every missed read as proven tampering |
The published 4 m value is a reader-dependent free-air distance. Installed range can change with reader power, antenna orientation, tag placement, nearby products and surrounding metal or liquid.
Submit the Physical Layout and RFID Data Together
Physical and Printed Requirements
- Target surface and available installation area
- Opening or removal path to be protected
- Logo, text and barcode artwork
- Serial-number sequence
- Laser-engraving requirement, if applicable
RFID and System Requirements
- Destination country and permitted UHF band
- EPC numbering and mapping rules
- TID capture requirement
- Access and kill password instructions
- Expected intact and tampered responses
We can review barcode printing, text, laser engraving and RFID encoding. Because the product includes a listed detection characteristic, the expected reader response and application decision rule should be documented during sample approval.
Four Results Required Before Bulk Production
Intact Read Result
Confirm the installed tag response at the required distance with the intended reader and antenna.
Tampered Result
Open, peel or disturb the sample as the real product would be handled and record the resulting reader response.
Surface Performance
Check adhesive contact, curvature, nearby materials and environmental exposure on the actual item.
Data Mapping
Verify that printed identifiers, EPC and TID open the correct controlled record.
Exception Logic
Test how the system handles unexpected, unreadable, duplicate, retired and replacement credentials.
Packaging Format
Approve roll direction, core requirement, quantity per roll and serialized sequence before production.
Anti-Tamper UHF RFID Tag FAQ
The specification identifies a tamper-proof detection feature. Its exact intact and disturbed responses should be confirmed with samples using the intended reader and application logic.
No. It is a passive UHF tag. A compatible reader and backend rule are needed to interrogate the tag, identify an exception and trigger any system notification.
No. The published value is a free-air result dependent on the reader. The final range changes with power, antenna placement, orientation, surface material and nearby objects.
No user memory is published for this G2IL+ configuration. Use EPC for the primary identifier and retain detailed product and transaction data in the linked database.
UHF regulations vary by country. Provide the destination market and reader model so frequency compatibility can be confirmed before ordering.
Standard smartphones do not normally read UHF EPC tags directly. Authentication also requires a trusted database and controlled verification process, not only the RFID identifier.
Metal can detune a standard UHF antenna. Provide the item material, mounting position and required range so an appropriate anti-metal configuration can be evaluated.
Provide the target item, bonding surface, protected opening, destination country, reader setup, expected detection response, quantity, artwork and EPC format.
Compare Detection, Destructible and Asset Tags
Define the Intact and Tampered Read Results
Send us the target item, protected opening, bonding surface, destination country, reader setup, required range, expected detection response, quantity, artwork and EPC format.
Hot Tags: anti tamper uhf rfid tag, China anti tamper uhf rfid tag manufacturers, suppliers, factory, anti tamper rfid benefit, rfid protection maintenance, rfid security function, rfid tamper evident demand, tamper proof rfid need, tamper resistant rfid use



















